T8 Ballast - Class 1, Div 2 - Complete unit with 2 LED tubes
Class I, Division 2,
Group A, B, C, D
Class II Group F, G
Dust and moisture resistant
Structurally rigid fibreglass body
High impact acrylic
DR diffuser held with positive cam latches
Continuous poured in place gasket
Suitable for indoor or outdoor applications
Uses T8 or T12 lamps
Garage and Workshops
Wet and Damp
Mid level, specification grade, fluorescent enclosed and gasketed fixture. For use in hazardous locations. For use in both indoor and outdoor applications where dust and moisture resistance is required. Available in 4 and 8 foot lengths.
Continuous poured in place gasket. Diffuser flange fits into the gasketed retention slot providing a continuous seal, and is held in place with retaining latches. Hole is 7/8" diameter and is provided with a threaded and gasketted hub for rigid 1/2" conduit attachment. Moulded, glass reinforced plastic housing. Internal housing assembly code gauge pre-painted white cold rolled steel.
Offset mounting pads which keeps luminaire level and slightly off of mounting surface, are formed within the housing.
High reflectivity coated, reflecting surfaces for improved efficiency.
Standard diffuser is high impact acrylic with textured pattern designed for high efficiency while providing reduced glare. Smooth surface faces outwards.
All electrical components are CSA or UL approved. Ballasts and lamp holders are replaceable without removing the luminaire from the mounting surface. Standard ballasts are electro-magnetic, energy saving where required. The standard voltage is 120V, 60 Hz, or as specified.
CSA approved. Class I Division 2,
Groups A,B,C,D. Class II, Groups F,G.